Exceptional engineering. Improved performance.
Tested in accordace with
|filter mode||pipe size||flow rate||dimensions (mm)||weight Kg||element model||no. of elements|
|D3028 XAC||¼||42||25||70||199||204||70||1||E30408 DXA / DAC||1/1|
|D3038 XAC||⅜||54||32||70||199||204||70||1||E30408 DXA / DAC||1/1|
|D3058 XAC||½||85||50||70||204||204||70||1.1||E30412 DXA / DAC||1/1|
|D3059 XAC||½||119||70||100||204||240||80||2.3||E30613 DXA / DAC||1/1|
|D3078 XAC||¾||144||85||100||240||240||80||2.3||E30613 DXA / DAC||1/1|
|D3079 XAC||¾||212||125||100||360||360||80||3.1||E30625 DXA / DAC||1/1|
|D3108 XAC||1||297||175||100||360||360||80||3.2||E30625 DXA / DAC||1/1|
D3028 to D3109
|Particle removal||0.01 micron||0.01 micron|
|Maximum particle size class**||1||1|
|Maximum oil content class**||1||1|
|Maximum oil carryover at 20°C (68°F)||0.01 mg/m³||0.003 mg/m³|
|Pressure loss - clean & dry||150 mbar||2.2 psi||75 mbar||1.1 ps|
|Pressure loss - oil saturated||300 mba||4.4 psi||-|
|Pressure loss - change element||400 mbar||6 psi||6 months / 1000 hours|
|Maximum working pressure||16 barg||232 psig||16 barg||232 psig|
|Element end cap colour||blue||black|
for maximum flow rate, multiply model flow rate by the correction factor corresponding to the minimum operating pressure
|Operating pressure barg (psig)||4 (58)||5(72)||6(87)||7(100)||8(115)||10(145)||12(174)||14(203)||16(232)|
|7 barg - correction factor||0.76||0.84||0.92||1.00||1.07||1.19||1.31||1.41||1.51|
1Duplex filters offer 2 stage filtration within one filter unit. Each filtration packege provides an XA grade element in thme lower section for oil removal, while the AC grade element in the upper section is for odour removal.
2Direction of air flow is inside to out through XA grade and outside to in through AC grade filter element.
3ADV6000C drains are fitted to models D3028XAC to D3058, ADV6000 drains are fitted to models D3059XAC to D3109 4 Models D3059 XAC to D3109 XAC can be adapted to use ¼" drains with a reducer.
4Models D3059 XAC to D3109 XAC can be adapted to use ¼" drains with a reducer
5Activated carbon filters must not operate in oil saturated condutions and will not remove certain types of gases including carbon monoxide (CO) and carbon dioxide (CO2).
6Duplex filters are manufactured from cast aluminium alloy and are PED 97/23/EC compliant for group 2 gases.
7Threaded connections are Rp (BSP parallel) to ISO 7/1 or NPT to ANSI B2.1 if supplied within North America.
8For NPT connections are Rp (BSP parallel) to ISO 7/1 or NPT to ANSI B2.1 if supplied within North America.
9Filter elements should be changed every 12 months / 8000 hours (whichever comes first). Activated carbon filter elements should be changed every 6 months / 1000 hours (whichever cones first)
10Filters are suitable for use with mineral and synthetic oils plus oil-free compressed air applications.
11Silicone free options are available, please contact Sales for details.